|
|
University Library
Subally, Pavel ; Žižka, Lukáš (referee) ; Vajkay, František (advisor)
The content of this diploma project is to design an university library in the city of Brno, Czech Republic. The object is designed as multistory building with underground stories included. The design is created based on requests brought by the investor and includes architectural, constructional and technological proposes for the building. The aim is to create not only a modern cultural and educational center but also a place of entertainment and relax for students of Vysoké Učení Technické. During the design it is taken in an account the request of having the auditorium and lecture rooms available for public, also.
|
|
|
Presidential villa Slavin
Batke, Ľuboš ; Kvapilová, Vendula (referee) ; Utíkalová, Ivana (advisor)
The subject of the bachelor's thesis is the elaboration of project documentation for the construction of a villa of the President of the Slovak Republic. The villa will serve as a residence during the discharge of an office of Slovak president and at the same time it will serve as a place for partial representative acts. The building of the presidential villa is divided into two parts: the representative part, which is designed as two-storey with basement, and the residential part, which is designed as two-storey without basement. In the basement there is a garage for 3 vehicles and on the plot, there will be an uncovered parking area for 3 vehicles. The floor plan of the villa consists of three rectangular shapes with a flat vegetated roof. Horizontal and vertical load-bearing structures are designed from monolithic reinforced concrete.
|
|
|
Mixed-use building
Vančo, Matúš ; Jelínková, Barbora (referee) ; Jelínek, Petr (advisor)
The subject of the thesis is the development of project documentation for the construction design of the mixed-use building in the city of Brno, a borough of Cerna Pole. The vertical load-bearing structures of the above ground floors are made of sand-lime blocks. The vertical load-bearing structures of the underground floor are made of cast-in-place concrete. The last floor has warm flat green roof. The main purpose of this building is for administration, trade and services, which make up to 60% of floor area. The rest of floor area is used for housing. On the north side is the underground parking garage. The residential part is oriented to the South, the offices are oriented to the North.
|
|
|
City within the City / "Trnitá City Block"
Solár, Michal ; Hybská, Bohumila (referee) ; Nový, Vítězslav (advisor)
The area of today's southern center of Brno was determined from the very beginning by the location of the rivers Svratka, Svitava and their drives, which defined the southern part of the city as a fertile area suitable for cultivation. After the advent of industrialism, the city transformed rapidly. The southern area was transformed from smaller villages into industrial units, which, due to the proximity of water and the newly established railway, expanded after 1838 to the entire vicinity of the Trnitá district. Already in this period, the location of the station by the Svratka River (in the proposed position from 2016) began to be considered, but due to the waterlogged soil and difficult construction conditions, it was decided for the station under the walls. It was this decision and the unsatisfactory conditions of waterlogged land for the development of the industrial area closer to the Svratka River that caused the suspension of the development of the southern suburbs. The proposal seeks to reflect the context of Brno's apartment buildings in the vicinity of the area, which lacks a comprehensive context and scale. At the same time, however, to solve the environmental problem by proper management of rainwater or the use and design of a recycled perimeter cladding of material obtained after the demolition of other buildings. The building is structurally designed as a combination of a wall system with monolithic, communication cores and the first floor.
|
|
|
Load-bearing reinforced concrete structures at the new residential building
Podolák, Patrik ; Šiška, Radek (referee) ; Strnad, Jiří (advisor)
The thesis deals with static assessment of load-bearing structures in a new family house. The house has several atypical structures. One of them is a flat roof of reinforced concrete with large overhanging ends. Furthermore, a large window lintel with a span of 8 meters, which is designed with prestressing ropes due to the large span and avoidance of lintel deflection due to the glass window underneath. The building is partly basement with a white bathtub type construction.
|
|
|
City within the City / "Trnitá City Block"
Solár, Michal ; Hybská, Bohumila (referee) ; Nový, Vítězslav (advisor)
The area of today's southern center of Brno was determined from the very beginning by the location of the rivers Svratka, Svitava and their drives, which defined the southern part of the city as a fertile area suitable for cultivation. After the advent of industrialism, the city transformed rapidly. The southern area was transformed from smaller villages into industrial units, which, due to the proximity of water and the newly established railway, expanded after 1838 to the entire vicinity of the Trnitá district. Already in this period, the location of the station by the Svratka River (in the proposed position from 2016) began to be considered, but due to the waterlogged soil and difficult construction conditions, it was decided for the station under the walls. It was this decision and the unsatisfactory conditions of waterlogged land for the development of the industrial area closer to the Svratka River that caused the suspension of the development of the southern suburbs. The proposal seeks to reflect the context of Brno's apartment buildings in the vicinity of the area, which lacks a comprehensive context and scale. At the same time, however, to solve the environmental problem by proper management of rainwater or the use and design of a recycled perimeter cladding of material obtained after the demolition of other buildings. The building is structurally designed as a combination of a wall system with monolithic, communication cores and the first floor.
|
|
|
Presidential villa Slavin
Batke, Ľuboš ; Kvapilová, Vendula (referee) ; Utíkalová, Ivana (advisor)
The subject of the bachelor's thesis is the elaboration of project documentation for the construction of a villa of the President of the Slovak Republic. The villa will serve as a residence during the discharge of an office of Slovak president and at the same time it will serve as a place for partial representative acts. The building of the presidential villa is divided into two parts: the representative part, which is designed as two-storey with basement, and the residential part, which is designed as two-storey without basement. In the basement there is a garage for 3 vehicles and on the plot, there will be an uncovered parking area for 3 vehicles. The floor plan of the villa consists of three rectangular shapes with a flat vegetated roof. Horizontal and vertical load-bearing structures are designed from monolithic reinforced concrete.
|
|
|
Mixed-use building
Vančo, Matúš ; Jelínková, Barbora (referee) ; Jelínek, Petr (advisor)
The subject of the thesis is the development of project documentation for the construction design of the mixed-use building in the city of Brno, a borough of Cerna Pole. The vertical load-bearing structures of the above ground floors are made of sand-lime blocks. The vertical load-bearing structures of the underground floor are made of cast-in-place concrete. The last floor has warm flat green roof. The main purpose of this building is for administration, trade and services, which make up to 60% of floor area. The rest of floor area is used for housing. On the north side is the underground parking garage. The residential part is oriented to the South, the offices are oriented to the North.
|
|
|
University Library
Subally, Pavel ; Žižka, Lukáš (referee) ; Vajkay, František (advisor)
The content of this diploma project is to design an university library in the city of Brno, Czech Republic. The object is designed as multistory building with underground stories included. The design is created based on requests brought by the investor and includes architectural, constructional and technological proposes for the building. The aim is to create not only a modern cultural and educational center but also a place of entertainment and relax for students of Vysoké Učení Technické. During the design it is taken in an account the request of having the auditorium and lecture rooms available for public, also.
|
guest ::
